Aircraft Report Interactive Help

Interactive Display

The interactive display shows all recent aircraft reports. There are three types of display:

  • PIREP-Turb - Turbulence PIREPs
    Figure 1: Turbulence PIREP symbols
  • PIREP-Ice - Icing PIREPs
    Figure 2: Icing PIREP symbols
  • PIREP-Wx - Weather AIREPs/PIREPs
    Figure 3: Weather model for AIREPs/PIREPs

URL Options

Here is a list of the URL options:

  • date=yyyymmddhhnn - This selects a specific date and time to display.
  • time=hr - This selects the initial time on the time slider (def: 0).
  • timelabform={full|simple} - This selects time slider labels. Full shows -/+ hours from current. Simple shows just the time and "Forecast for" if it's a future time.
  • refresh=min - This sets the auto-refresh time interval (def: 5 min).
  • tz=tz - This sets the time zone to show in the date header. This can be "local" which is the browser time zone or "label,offset" which is the zone name and offset in hours. For example "CDT,-5". (def: UTC).
  • region=reg - This will center the map to a specific region. Options include: "conus", "us", "northeast", "ne", "southeast", "se", "northcentral", "nc", "southcentral", "sc", "northwest", "nw", "southwest", "sw", "alaska", "ak", "hawaii", "hi", "gulfmexico", "gmx", "caribbean", "car", "europe", "eur", "southamerica", "sam", "easia", "eas", "australia", "aus", "zab", "zau", "zbw", "zdc", "zdv", "zhu", "zfw", "zid", "zjx", "zkc", "zla", "zlc", "zma", "zme", "zmp", "zny", "zoa", "zob", "zse", "ztl" (def: none).
  • center=lat,lon - This will center the map at a specific latitude and longitude. The default is 39,-97.
  • zoom=level - This sets the zoom level. The default is 4. A higher number zooms in. A lower number zooms out.
  • fullmode=(screen|window) - This sets the full screen mode. "screen" sets it to full screen. "window" sets it to fill the current browser window. The default is screen.
  • fullscreen=(on|off) - This sets the display to go into full window if fullmode=window.
  • basemap=(light|dark|simple) - This selects the type of basemap. The default is light.
  • sat={on|off} - This turns the satellite layer on or off. The default is off.
  • satprod={ir|vis|wv} - Specifies the type of satellite image. The default is ir.
  • satopacity=# - Specifies the satellite image opacity (0=transparent to 1=opaque). The default is .5.
  • satlabform={on|simple|off} - Specifies the satellite label format. The choices are "on" which shows type of image and time, "simple" which shows only image type and "off" which shows no label. The default is "full".
  • rad={on|off} - This turns the radar layer on or off. The default is off.
  • radprod={rala|cref} - Specifies the type of radar image: "rala" for reflectivity at lowest altitude or "cref" for composite reflectivity. The default is rala.
  • radopacity=# - Specifies the radar image opacity (0=transparent to 1=opaque). The default is .75.
  • radlabform={on|full|simple|off} - Specifies the radar label format. The choices are "on" or "full" which shows type of radar and time, "simple" which shows only radar type and "off" which shows no label. The default is "full".
  • airep={on|off} - This turns the AIREP/PIREP layer on or off. The default is on.
  • airtype=param - This selects the type of AIREP data to display. The default is all. Multiple types can be selected separated by commas. Options are:
    • turb - Turbulence reports
    • icing - Icing reports
    • wx - Reports with weather (temp, clouds)
    • misc - Other reports
  • airtop=## - Specifies top level in hundreds of feet of AIREPs to display. The default is undef.
  • airbottom=## - Specifies bottom level in hundreds of feet of AIREPs to display. The default is undef.
  • airage=## - Specifies age in hours of AIREPs to display. The default is 1.5 (90min).
  • airinten=## - Specifies minimum intensity of AIREPs to display. Options are "all", "lgt" for light, "mod" for moderate and "sev" for severe. The default is all.
  • airscale=## - Specifies scale factor for the AIREP icon. The default is 1.
  • airnoneg={on|off} - Specifies not to plot PIREPs with negative turb and ice reports. The default is off.
  • highways={on|off} - Turns highway layer on or off. These are primarily interstates. The default is off.
  • roads={on|off} - Turns roads layer on or off. These are primarily US and state highways plus some city streets. The default is off.
  • counties={on|off} - Turns county layer on or off. The default is off.
  • jetroutes={on|off} - Turns the jetroutes layer on or off. The default is off.
  • firs={on|off} - Turns the ARTCC/FIR layer on or off. The default is off.
  • navaids={on|off} - Turns the Nav Aids layer on or off. The default is off.
  • navscale=## - Specifies scale factor for the Nav Aid icon. The default is 1.
  • navlabel={on|off} - Turns the Nav Aid labels on or off. The default is off.
  • metric={on|off} - Specifies to display data in metric units. The default is off.
  • mouseformat={deg|dm|dms} - Specifies to format for the mouse location: degrees, degree/frac. minute, degree/minute/second. The default is deg.
  • level=## - Specifies value of the level in the level slider. The default is none.
  • hover={on|off} - Turns on hover for features. The popups will come up when mouse hovers. Default is off.

Page loaded:  18:25 UTC  |   11:25 AM Pacific  |   12:25 PM Mountain  |   01:25 PM Central  |   02:25 PM Eastern

 

ADVISORIES

FORECASTS

FORECASTS

OBSERVATIONS

USER TOOLS

ABOUT US